Smaller sized, compact, but strong enough jackplate for average 15/20 or 25/30HP small tiller type, clamper mounted outboard engines only!
Feel free to contact me, I am at your disposal for your questions!
Gyula Zoltán Kis
creator and owner of jackplate.hu
The basic VANCE JPL2412SB 5” MINI JackPlate ready to use, immediatelly capable product, but could be upgraded with the following optional elements
Colour and surface: Basic RAW surface on the basic product!
Transom strengthening solution for inside:
Optional, always on warehouse (CODE: TP212)
JackPlate Clamper Plate optional:
2,54mm thick white Clamper Plate on basic product!
Optionally ordered, allways on warehouse (CODE: SBPLUS)
Screws, washers and nuts for installation: (Complete package)
Optional, allways on stock! (CODE BKSMALL)
For insulation, waterproof installation of the jackplate
The JPL2412SB is a miniature single-adjusting jacking plate developed for smaller tiller type outboard clamp-on style engine designs. It is capable of vertically lifting outboard 3” (7,72cm) with an offset of 5” (12,70cm) from transom. The engine side is 2” (5,08cm) higher than the transom so you can get a total of 5” (12,70cm) of lift if you lift the unit’s adjustment to Maximum height. If you want to stay the same height when you install, simply mount the unit a little lower on your transom. The unique ability to adjust vertically sets this unit apart from other style plates. The jack plate has a footprint of 32x13cm with a 2,50-5,00cm thick clamping surface for all clamp on style outboard engines. With a weight of only 4,99kg the JPL2412SB is capable of handling 0 to 40 HP motors.
The JPL2412SB is constructed of high-strength aircraft quality aluminum and non-rusting hardware consisting of stainless steel, brass, and bearing bronze. The mounting surface plate is made of space-age polymer material known as Starboard which is stronger than marine grade plywood yet will never deteriorate. Starboard will not absorb water therefore it is not subject to rupture from freezing.